Optimization in science and engineering
Leila Hasan-Beigi Dashtbayaz; Isa Nakhai Kamalabadi; Ali Husseinzadeh Kashan; Sakine Beigi
Abstract
Purpose: In CNC machines, changes in machining conditions such as speed and feed rate will also change the operating time. Changes in these conditions also result in changes in the production cycle time and production costs. Tool life is also sensitive to these changes. Appropriate machining time is ...
Read More
Purpose: In CNC machines, changes in machining conditions such as speed and feed rate will also change the operating time. Changes in these conditions also result in changes in the production cycle time and production costs. Tool life is also sensitive to these changes. Appropriate machining time is generally determined by assuming a certain lifetime for CNC machine tools to minimize production costs. However, minimizing costs usually results in increased machining time and lower output rates.Methodology: In this research, the optimal machining time is determined using a bi-objective model including minimizing the cost and total production time of a robotic cell with a CNC machine and a material handling robot. It has assumed that identical productions are produced in this robotic cell. Using the Epsilon constraint method, the proposed model is coded in GAMS software and its results are reported.Findings: In this research, the lifespan of the CNC machine tools can be considered as a determined or probable value. The results showed that decreasing the operation time at different speeds does not necessarily impose the same cost on the system. Therefore, it is necessary to be more careful in choosing the appropriate machining time for different tools and parts. Paying attention to the rate of suddenly tool breakdowns is also important in choosing the appropriate time for machining. Using a set of non-dominated solutions, it is possible to determine the appropriate machining time in different parts to achieve a suitable level of problem objectives.Originality/Value: In this research, for the first time, the failure rate of the tool as one of the cost factors in the robotic cell has been added to the cost function of a production cycle and its effect on determining the appropriate machining time has been investigated.